Skip to content

Homeowners want to take control of their energy usage.

The Basis smart panel replaces the traditional switchboard with something buyers actually value: energy control, cost savings, and the safest electrical panel available.

The Basis Board

Trusted by builders across New Zealand, now in Australia.

1,000+ contracted new builds with New Zealand's largest builders. We're now taking enquiries Australia-wide.

CETA Homes
Fletcher Living
Freedom Lifestyle Villages
GJ Gardner
Ingenio Homes
Laing
Latitude Homes
Signature Homes
Venture Developments
  • Designed and tested to AS/NZS 3000.
  • RCBOs certified to AS/NZS 61009. Arc fault detection to AS/NZS 62606.
  • RCM marked, registered under the EESS (reg. no. TBC).
  • Installed by your licensed electrician, to your state's requirements.

Build higher-performing, all-electric homes.

The Basis smart panel is designed and tested to AS/NZS 3000 and delivers what Australian buyers actually value: control over their energy, more of their own solar used at home, and the safest electrical panel available.

Elevate your brand.

A genuine point of difference buyers can see, touch and talk about. Maximum safety as standard, an industry-beating product warranty, and local Basis support so every install lands as a premium experience.

Family using the Basis Home app on the couch

Hundreds back in your customers' pocket. Every year.

Most homeowners give away solar energy they could have used, and overpay their retailer on top. Basis ends that. Circuit-level control lifts self-consumption, balances exports within network limits, and keeps the home on the best plan available. Real value, every year, for the family living in the home you built.

Father and child checking the Basis app together

Built for your business, not just your build.

Every panel is factory-assembled and tested before it reaches site. Your electrician installs faster and hands over a higher-quality job on every home, with solar, battery and EV readiness standard and no custom board build required.

Electrician installing a Basis Board in a new home

Defer the supply upgrade your build doesn't need.

Solar, EV charging, induction, heat pump hot water and reverse-cycle air conditioning all land on the same connection. Without load management, that peak can force a consumer mains or single-to-three-phase upgrade before the slab is even down. Basis balances demand across the supply you already have, deferring or avoiding the upgrade entirely and taking a cost line out of the project.

A$3k–12k+
Supply upgrade costs deferred per build

Victoria, from 1 January 2027

Every new residential and commercial building must be all-electric. Each gas appliance you would have specified becomes an electrical load on the board instead. Load control stops that turning into a supply upgrade on every lot.

45 min
Average install time in new builds
A$6,500
Value returned to your buyer over 5 years
5 yr
Warranty included as standard

Effortless control. From the day your customer moves in.

Every Basis smart panel includes the Basis Home app, free, with no subscriptions. Here's what your buyers get from move-in day, and what they'll associate with the home you built.

Basis Home app live circuit visibility
Basis Home app cost insights

See every dollar, in real time.

Circuit-by-circuit tracking shows exactly where energy is going. Homeowners spot waste they never knew was there, and fix it the same day.

Use the solar you paid for.

Hot water, pool pumps, EV charging and pre-cooling shift into the middle of the day automatically. More self-consumption, less given away at whatever the retailer feels like paying, and no daily effort from the homeowner.

Compare plans on real usage.

Ranked against the home's measured circuit-level usage, not an estimate off a paper bill. Buyers see exactly what switching is worth.

Catch issues before they become repairs.

Live monitoring of electrical health. RCD trips and fault events go straight to their phone, so small issues get solved before they become expensive ones.

Real numbers from real homes.

Measured results from New Zealand installs. Australian case studies will follow as our first homes come online.

NZ$1,366
Annual savings · New Zealand home

Family of six cuts energy bills.

27% less energy used, 37% lower costs. Real-time insights helped them find waste they never knew existed.

Read the full story
NZ$642
Wasted annually · New Zealand home

Inefficient fridge spotted instantly.

16% less energy used after identifying and replacing an inefficient fridge, plus the running cost it was quietly adding every month.

Read the full story
NZ$14,000
Supply upgrade avoided · New Zealand home

Circuit-level control saves on infrastructure.

Detailed insights and circuit-level control avoided $14,000 of unnecessary network upgrade cost on a single connection.

Read the full story

The most valuable upgrade in any new build.

The switchboard is already a cost line in the build. Basis turns it into a value-add line, delivering aesthetic, functional, cost-saving and safety wins at once, for less than the price of a stone benchtop upgrade.

Aesthetic

Stone benchtop

A$2,000 – A$4,000
  • Aesthetic upgrade
  • Ongoing savings
  • Safety improvement
  • Functional benefit
Comfort

Ducted reverse-cycle AC

A$10,000 – A$20,000
  • Year-round comfort
  • Ongoing savings
  • Safety improvement
  • Energy visibility
Generation

Rooftop solar + battery

A$6,000 – A$20,000 after rebates
  • Generates power
  • Exports earn 0–6c
  • No load control of its own
  • Basis shifts load to soak it up
The Basis panel

Basis Board.

Less than A$2,500 incremental over a standard switchboard.
  • Aesthetic Clean, modern panel design.
  • Functional Real-time control, automated routines, plan comparison.
  • Cost saving Hundreds a year, and years off your buyer's solar payback.
  • Safety Built well above minimum standard, with arc fault detection and live fault monitoring.

For less than A$2,500 incremental, your buyer gets A$6,500 back over five years, and gets more out of the solar you already put on the roof. No other upgrade comes close on value per dollar.

Start building with Basis.

Contact us.

Reach out online and we'll book a time to meet face to face. We're on the ground in Melbourne, and we travel for the rest of the country.

Product intro.

Our team shows you the panel in person and walks through how it works for you, your electrician and your customers.

Electrician training.

We connect with your electrical contractor and give them everything they need to quote and install, aligned to the licensing and inspection requirements in your state.

Pricing.

We put together a supply agreement based on your electrician's pricing, with co-marketing support and exclusive rebates built in.

Grow with us.

Your electrician installs the first panel with our hands-on support. Your customers benefit from day one.