Control any circuit.
Switch circuits from anywhere, schedule them, and let the Board manage your supply limit.
BoardTrade AppHome App
Load limitingNewBeta
Stay under your supply limit, automatically.
When a home nears its supply limit, the Board puts low-priority circuits like hot water and EV charging on standby, then switches them back on, one at a time, when there's room. No supply upgrade and no extra hardware.
Your electrician picks which circuits can pause, and in what order, when they commission the Board. Decisions are made on the Board itself, so it keeps working without the internet.
- Supply limit
- 63A by default
- Pauses
- Chosen circuits, in order
- Restores
- In reverse order
- Decided
- On the board
- Set up in
- Trade App
- Homeowners see
- Standby status in the Home App
Home App
Remote control
Left the oven on? Switch it off from wherever you are.
Every circuit on the Board is switchable, so the Home App can turn any of them on or off from anywhere with a connection. Put a circuit on standby while you're away, or check it's off before bed.
- Circuits
- Any
- From
- Home App, anywhere
Home App
Routines
Run the big loads when power is cheapest.
Set a time-based routine for any circuit, like heating hot water or charging the EV overnight, and the Board runs it for you. Routines and load limiting work together: if either wants a circuit off, it stays off.
- Type
- Time-based schedules
- Circuits
- Any
Connected to